The AKG C111 LP headset microphone is an extremely lightweight (7g) headset. This headset is compatible with AKG wireless systems.

Sturdy metal housing
42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
Enhanced frequency bank system with up to 12 compatible frequencies
Pilot tone squelch to eliminate RF interference when the transmitter is turned off
Improved AF frequency range
Increased range for audio sensitivity
Wireless synchronization of transmitters via infrared interface of receiver
User-friendly menu control with more operating options
Illuminated graphic display
Auto-Lock function prevents settings from being accidentally changed
HDX compander for crystal-clear sound
Transmitter has 4-step battery indication, also shown on the receiver display
Programmable Mute Function
Contacts for charging BA 2015 battery pack directly in the transmitter
A wide range of accessories adapts the system to every need

Frequency range 780...822 MHz 503541
Frequency response (microphone) 80 - 18000 Hz
Compander HDX
Audio XLR connection 3.5 mm jack
THD, total harmonic distortion < 0.9 %
Signal-to-noise ratio > 110 dB(A)
RF frequency range 516...865 MHz
RF output power 30 mW
Transmission/Reception Frequencies 1680 (max. 20 Presets)
Switching bandwidth 42 MHz
Peak deviation +/- 48 kHz
In accordance with ETS 300422, ETS 300445, CE, FCC
Input voltage range 1.8 V line
Transmitter
Dimensions 82 x 64 x 24 mm
Weight ~ 160 g
Operating time > 8 h

-Showroom model -

Top:

Type: Active, sealed cabinet, two-way, compact full-range monitor
Drivers: 130mm aluminum cone LF/MF driver. 25mm ring radiator HF driver.
Frequency response: 100Hz to 40kHz ± 3dB
Trims: Sensitivity 0dB, -3dB, -6dB. HF: +2dB, 0dB, -2dB. LF: Extended, Normal
Amplifiers: LF / MF 50 watts / HF 25 watts.
Input sensitivity: 300mv for nominal power
Dimensions: (h x w x d): 220 x 150 x 180 mm
Weight: 3 kg (single, unpacked)
Shielded: Yes

Sub:

Type: Closed active subwoofer.
Drivers: Dual 250mm aluminum cones. Powerful long-throw magnet system.
Low frequency extension: -6dB @ 25Hz
Amplifier: 200 watts
Low-pass filter: 2nd order, switchable 70Hz or 100Hz
Phase: 0 degrees, 180 degrees
Input sensitivity: 600mV for nominal power. Level @ 0dB
Dimensions: (h x w x d): 350 x 350 x 330 mm
Weight: 14.5 kg (single, unpacked)
Shielded: No

Compact and foldable for easy portability Remarkable sound quality with Acoustic Bass Duct technology for rich bass sound Total output power 2W 1 easy-to-carry speaker system Neodymium magnets produce more energy.

Crossover frequency: 2100 Hz
Housing material: ABS, die-cast aluminum base
Enclosure type: Bass reflex via dual rear-firing ports
Frequency response: 92Hz-20kHz (+ -) 3dB
Input terminals: One set of speaker terminals
Mounting: base 360 ​​(o) rotatable for wall mounting via keyholes
Nominal impedance: 8 ohm compatible
Power handling: 75 W continuous (300 W peak)
Sensitivity: 94dB @ 2.83V / 1 meter
Tweeter: One 1" (2.54 cm) titanium dome compression driver
Woofer: Two 4" (10.16 cm) ceramic metal(r) cones
Dimensions: 19.1 x 36.8 x 21 cm
Weight: 3.6 kg

Elegant design with high-quality materials and minimalist finish
Crystal clear sound quality with DMC technology
Dual Passive Radiators - The passive radiators produce powerful bass and reduce sound distortion.
Magnetic Fluid Speaker Units - Sony's damper-free Magnetic Fluid speaker unit for higher sound pressure and less sound distortion
Clear Phase Digital Signal Processor - Original Sony DSP refines the signal to its original quality.
Stream your content wirelessly via AirPlay - AirPlay lets you stream content wirelessly from your iPad/iPhone/iPod touch/Mac.
Sleek, beautiful, and elegant design. - The high-quality fabric covering the speakers and the brushed stainless steel finish make your living room look even more refined.
Made for iPod/iPhone/iPad - Play music and videos on your iPod, iPhone or iPad while charging it at the same time.
Wireless Remote Control - Control your content remotely with the included remote control

Music
Speaker Type 2.1 Channel Speaker (1 Box)
Output power 60 W
Diameter of speaker unit (woofer) 2x 48 mm
Speaker impedance 8 ohms
Diameter of speaker unit (subwoofer) 1x 90 mm
Speaker impedance (subwoofer) 4 ohms
Equalizer, by D-Sappli app
Volume control

Connections
Station for iPod, iPhone, iPad
AirPlay
iPod connector (30-pin)
iPod battery charger
iPod control Full iPod control from main unit
Audio input (stereo mini plug)
DC-In
Ethernet connection

General
Remote control
AC power supply 100 V-240 V
Dimensions (W x H x D mm)
Approx. 401mm X 176mm X 160mm
Weight (kg) 3.3 kg

The BG 6.1 is a high output dynamic instrument microphone.

Transducer type: Dynamic
Polar Pattern: Cardioid
Frequency response: 80 Hz - 15 kHz
Sensitivity (1 kHz): -74 dB (.200 mV)
Weight: 320 g

Polar pattern cardioid
Frequency range 30Hz - 15kHz
Sensitivity -85dB (±3dB)
Impedance 150 ohms
Dimensions 125mm x 74mm
Weight 500g

Polar pattern cardioid
Frequency range 40Hz - 18kHz
Sensitivity -76dB (±3dB)
Impedance 400 ohms
Dimensions 120 x 40mm
Weight 120g

Hello Kitty in-ear earphones with 10mm speaker and 3.5mm jack plug.

Includes storage box and 3 sizes of ear adapters

Superman closed-back headphones for children from 3 to 7 years with 30 mm speaker and 3.5 mm jack plug.

Peppa Pig closed-back headphones for children aged 3 to 7 years with 30 mm speaker and 3.5 mm jack plug.

High-power DJ headphones
Very high output power: 3500mW max.
57mm speakers provide exceptional bass reproduction
Easily foldable, perfect for mobile use
3m coiled cord

• Frequency response: 20Hz - 20KHz
• THD @ +10dBu: < 0.008%
• Residual noise
  • MAIN output: -103dB
• Input gain
  • Microphone : de 0dB à +45dB
  • Line: -20dB to +25dB
• Phantom: +48V DC
• EQ
  • HIGH: +/- 15dB @ 12KHz
  • LOW: +/- 15dB @ 80Hz
• Max output level
  • MAIN: +21 dBu
  • Headphone output: +18 dBu
• Input impedance
  • Microphone: 2.3K Ohms balanced
  • Line: 20 K Ohms balanced
  • RCA: 24 K Ohms unbalanced
• Output impedance
  • MAIN: 120 Ohms
  • REC OUT: 1 K Ohms
  • PHONES: 25 Ohms
• Vu meter: -20 dB, -10 dB, 0dB, clip
• Power supply : AC100~240V 50/60 Hz > DC12V 1A switch power adapter
• Power consumption: 11W
• Size (H x L x E): 165 x 120 x 68 mm
• Weight: 0.68 kg

Expect the unexpected with room-filling, dynamic sound from a truly feature-packed party track, created by the world's largest specialist sound company.

• Built-in music streaming services
• MusicCast multi-room technology
• Compatible with Alexa voice control* (*availability varies by region)
• High-res audio
• Connect to a TV for better sound
• Can be used together for stereo (2 units required)
• Can be used as surround speakers together with an AV receiver or soundbar* (*specific MusicCast models only)
• Simple presets, with soft-touch, to start playback instantly.
• Alarm

• Superior, crystal clear, sound quality from a compact full range speaker cabinet.
• The VIBE15 Mk2 can be easily upgraded to an active (powered) cabinet: just plug-in the optional AVM-2 amplifier module, a matter of minutes!
• Can also be used as a stage monitor.
• Perfect for permanent installation in bars, clubs and all kinds of venues where small cabinet size and sound quality at high SPL are important!
• Perfect for portable use: DJ, hiring companies, …
• VIBE15 Mk2 and VIBE15-SUB Mk2 or VIBE18-SUB Mk2 make a perfect couple for more demanding situations.
• Solid, high strength, MDF enclosure
• Scratch resistant polyurethane painting
• Strong Metal grill with acoustic foam on the inside: improved look and better protection the speaker components against dust and splashing water.
• Strong M8 Rigging Points
• Built-in 35mm Speaker stand adapter
• High Power 15inch (38cm) Woofer
• High Power 1.5inch Titanium Driver
• Specially designed Glass fiber horn
• 2 Neutrik Speakon® connectors
• Built-in heavy duty carrying handles
• Heavy-duty rubber feet

The AE120 is the flagship of the 100 series and is designed as a three-way loudspeaker. The AE120 delivers big sound from a relatively small speaker, with a stylish design. Two bass drivers deliver a truly room-filling performance. A separate midrange driver, housed in its own compartment within the speaker, neutralizes any reflections within the cabinet. Integrated with a Wide Dispersion Technology waveguide, the 25mm soft dome tweeter ensures high sensitivity, control, and distortion-free operation.

The three-way crossover compensates for impedance differences to prevent resonance issues that can slow down the bass and unnecessarily color the midrange. Special attention was paid to phase and time alignment for beautiful coherence across the entire frequency range. This results in very even distribution with exceptionally clear highs and mids and a very tight bass sound. The baffle is made of 18mm MDF and, like its smaller brother, the AE109, is weighted to dampen vibrations. The internal design is specifically designed to minimize midrange coloration for a clear and open sound. Furthermore, the speaker features a discreet plinth for added stability, which improves dynamics and stereo focus.

The AE109 effortlessly delivers room-filling music from one of the most compact floor-standing speakers, just like the acclaimed original AE109 from 20 years ago. This is achieved by using two 110mm paper cone drivers with an ultra-high-force motor system, combined with a soft 25mm dome tweeter. The 2.5-way crossover was designed specifically for this speaker and delivers sound quality and power never before seen in this size. Special attention was paid to phase and time alignment for beautiful coherence across the entire frequency range.

Like the AE100 bookshelf speaker, the cabinet is made of 18mm MDF, and its design is heavily inspired by the award-winning Reference series. The result is a beautifully clear sound with power and presentation that will naturally excite you.

The AE100 is a compact speaker for bookshelves or speaker stands. This speaker is built precisely according to Acoustic Energy's philosophy.

The AE100 was designed to produce a loudspeaker that delivers a lot of sound for its size. This was achieved by building a 110mm mid-bass driver around a powerful long-throw motor system. The bass frequencies were enhanced by a large cross-section in the bass port, which eliminates turbulence.

A 25mm soft dome tweeter with Acoustic Energy's "Wide Dispersion Technology" completes the package. The whole thing is housed in an 18mm thick MDF cabinet. With design elements taken directly from the acclaimed Reference series and a classically inspired appearance, this speaker is sure to look great in any living room.

The AE100 is a compact speaker for bookshelves or speaker stands. This speaker is built precisely according to Acoustic Energy's philosophy.

The AE100 was designed to produce a loudspeaker that delivers a lot of sound for its size. This was achieved by building a 110mm mid-bass driver around a powerful long-throw motor system. The bass frequencies were enhanced by a large cross-section in the bass port, which eliminates turbulence.

A 25mm soft dome tweeter with Acoustic Energy's "Wide Dispersion Technology" completes the package. The whole thing is housed in an 18mm thick MDF cabinet. With design elements taken directly from the acclaimed Reference series and a classically inspired appearance, this speaker is sure to look great in any living room.

• Very compact subwoofer cabinet with powerful bass reproduction: perfect for discrete installation in clubs and pubs, also very suitable for portable applications.
• The VIBE15-SUB Mk2 can be easily upgraded to an active (powered) cabinet: just plug-in the optional AVM-2 amplifier module, a matter of minutes!
• Perfect for permanent installation in clubs, discotheques and all kinds of venues where good sound quality at high SPL is important!
• Perfect for portable use: DJ, hiring companies, …
• VIBE15-SUB Mk2 can be combined with VIBE10 Mk2 or VIBE12 Mk2 to obtain a warm, full bodied sound!
• Solid, high strength, plywood enclosure
• Scratch resistant polyurethane painting
• Strong Metal grill with acoustic foam on the inside: improved look and better protection the speaker components against dust and splashing water.
• Built-in M20 stand adapter on the topside.
• High Power 15inch Woofer with ALU basket
• Built-in heavy duty carrying handles
• Fixing points on the back panel for optional wheels
• Heavy-duty rubber feet

The AE109 effortlessly delivers room-filling music from one of the most compact floor-standing speakers, just like the acclaimed original AE109 from 20 years ago. This is achieved by using two 110mm paper cone drivers with an ultra-high-force motor system, combined with a soft 25mm dome tweeter. The 2.5-way crossover was designed specifically for this speaker and delivers sound quality and power never before seen in this size. Special attention was paid to phase and time alignment for beautiful coherence across the entire frequency range.

Like the AE100 bookshelf speaker, the cabinet is made of 18mm MDF, and its design is heavily inspired by the award-winning Reference series. The result is a beautifully clear sound with power and presentation that will naturally excite you.

The AE100 is a compact speaker for bookshelves or speaker stands. This speaker is built precisely according to Acoustic Energy's philosophy.

The AE100 was designed to produce a loudspeaker that delivers a lot of sound for its size. This was achieved by building a 110mm mid-bass driver around a powerful long-throw motor system. The bass frequencies were enhanced by a large cross-section in the bass port, which eliminates turbulence.

A 25mm soft dome tweeter with Acoustic Energy's "Wide Dispersion Technology" completes the package. The whole thing is housed in an 18mm thick MDF cabinet. With design elements taken directly from the acclaimed Reference series and a classically inspired appearance, this speaker is sure to look great in any living room.

• Superior, crystal clear, sound quality from a compact full range speaker cabinet.
• The VIBE10 Mk2 can be easily upgraded to an active (powered) cabinet: just plug-in the optional AVM-1 amplifier module, a matter of minutes!
• Can also be used as a stage monitor.
• Perfect for permanent installation in bars, clubs and all kinds of venues where small cabinet size and sound quality at high SPL are important!
• Perfect for portable use: DJ, hiring companies, …
• VIBE10 Mk2 and VIBE15-SUB Mk2 or VIBE18-SUB Mk2 make a perfect couple for more demanding situations.
• Solid, high strength, MDF enclosure
• Scratch resistant polyurethane painting
• Strong Metal grill with acoustic foam on the inside: improved look and better protection the speaker components against dust and splashing water.
• Strong M8 Rigging Points
• Built-in 35mm Speaker stand adapter
• High Power 10inch (25cm) Woofer
• High Power 1.5inch Titanium Driver
• Specially designed Glass fiber horn
• 2 Neutrik Speakon® connectors
• Built-in heavy duty carrying handles
• Heavy-duty rubber feet

• Superior, crystal clear, sound quality from a compact full range speaker cabinet.
• The VIBE12 Mk2 can be easily upgraded to an active (powered) cabinet: just plug-in the optional AVM-1 amplifier module, a matter of minutes!
• Can also be used as a stage monitor.
• Perfect for permanent installation in bars, clubs and all kinds of venues where small cabinet size and sound quality at high SPL are important!
• Perfect for portable use: DJ, hiring companies, …
• VIBE12 Mk2 and VIBE15-SUB Mk2 or VIBE18-SUB Mk2 make a perfect couple for more demanding situations.
• Solid, high strength, MDF enclosure
• Scratch resistant polyurethane painting
• Strong Metal grill with acoustic foam on the inside: improved look and better protection the speaker components against dust and splashing water.
• Strong M8 Rigging Points
• Built-in 35mm Speaker stand adapter
• High Power 12inch (30cm) Woofer
• High Power 1.5inch Titanium Driver
• Specially designed Glass fiber horn
• 2 Neutrik Speakon® connectors
• Built-in heavy duty carrying handles
• Heavy-duty rubber feet

• Frequency response: 20Hz - 20KHz
• THD @ +10dBu: < 0.008%
• Residual noise
  • MAIN output: -103dB
  • AUX SEND output : -90dB (only for Mi4U and Mi6U)
• Input gain
  • Microphone : de 0dB à +45dB
  • Line: -20dB to +25dB
• Phantom: +48V DC
• EQ
  • HIGH: +/- 15dB @ 12KHz
  • LOW: +/- 15dB @ 80Hz
• Max output level
  • MAIN/AUX SEND: +21 dBu
  • Headphone output: +18 dBu
• Input impedance
  • Microphone: 2.3K Ohms balanced
  • Line: 20 K Ohms balanced
  • Aux / RCA: 24 K Ohms unbalanced
• Output impedance
  • Main/Aux Send: 120 Ohms
  • REC OUT: 1 K Ohms
  • PHONES: 25 Ohms
• Vu meter: -20 dB, -10 dB, 0dB, clip
• Power supply : AC100~240V 50/60 Hz > DC12V 1A switch power adapter
• Power consumption: 11W
• Size (H x L x E): 220 x 160 x 68 mm
• Weight: 0.78 kg

The P420 is a multi-pattern large-diaphragm true condenser microphone for demanding project studio recording applications. With high sensitivity and a maximum SPL of 155dB, the P420 delivers warm, transparent sound quality that's perfectly suited for ensemble recordings, grand pianos, woodwinds and brass instruments, as well as drums and percussion. With three selectable polar patterns—cardioid, omnidirectional, or figure-8—it's an ideal tool for stereo miking techniques and ambient recording.

• Frequency response: 20Hz - 20KHz
• THD @ +10dBu: < 0.008%
• Residual noise
  • MAIN output: -103dB
  • AUX SEND output : -90dB (only for Mi4U and Mi6U)
• Input gain
  • Microphone : de 0dB à +45dB
  • Line: -20dB to +25dB
• Phantom: +48V DC
• EQ
  • HIGH: +/- 15dB @ 12KHz
  • LOW: +/- 15dB @ 80Hz
• Max output level
  • MAIN/AUX SEND: +21 dBu
  • Headphone output: +18 dBu
• Input impedance
  • Microphone: 2.3K Ohms balanced
  • Line: 20 K Ohms balanced
  • Aux / RCA: 24 K Ohms unbalanced
• Output impedance
  • Main/Aux Send: 120 Ohms
  • REC OUT: 1 K Ohms
  • PHONES: 25 Ohms
• Vu meter: -20 dB, -10 dB, 0dB, clip
• Power supply : AC100~240V 50/60 Hz > DC12V 1A switch power adapter
• Power consumption: 11W
• Size (H x L x E): 220 x 210 x 68 mm
• Weight: 0.98 kg