The AE100 is a compact speaker for bookshelves or speaker stands. This speaker is built precisely according to Acoustic Energy's philosophy.

The AE100 was designed to produce a loudspeaker that delivers a lot of sound for its size. This was achieved by building a 110mm mid-bass driver around a powerful long-throw motor system. The bass frequencies were enhanced by a large cross-section in the bass port, which eliminates turbulence.

A 25mm soft dome tweeter with Acoustic Energy's "Wide Dispersion Technology" completes the package. The whole thing is housed in an 18mm thick MDF cabinet. With design elements taken directly from the acclaimed Reference series and a classically inspired appearance, this speaker is sure to look great in any living room.

The AE100 is a compact speaker for bookshelves or speaker stands. This speaker is built precisely according to Acoustic Energy's philosophy.

The AE100 was designed to produce a loudspeaker that delivers a lot of sound for its size. This was achieved by building a 110mm mid-bass driver around a powerful long-throw motor system. The bass frequencies were enhanced by a large cross-section in the bass port, which eliminates turbulence.

A 25mm soft dome tweeter with Acoustic Energy's "Wide Dispersion Technology" completes the package. The whole thing is housed in an 18mm thick MDF cabinet. With design elements taken directly from the acclaimed Reference series and a classically inspired appearance, this speaker is sure to look great in any living room.

EIKON ITAKA headphones are optimized for accurate and powerful sound reproduction, offering an ideal frequency response for the rendering of any musical instrument. Transparency and spatiality, combined with the comfortable padded ear cushions, enhance the qualities even in studio environments.

Thanks to the powerful 45 mm neodymium transducers, Eikon ITAKA headphones provide unparalleled frequency response and optimal comfort for an optimal listening experience.

• Professional high-end closed supra-aural headphones
• 45 mm driver size Dynamic neodymium magnet
• Detachable single-sided cable
• Two 1.8-meter cables included
• Comfortable fit thanks to robust, adjustable, softly padded headband
• 3.5 + 6.3 mm stereo jack

Discover the ultimate comfort and durability of these professional headphones with large earcups that fit comfortably over your ears. A generous 3-meter cable gives you all the freedom of movement you need, whether you're in the studio or on the go.

The aluminum spring, covered in soft foam, not only provides unparalleled comfort during long listening sessions but also makes these headphones virtually indestructible. They're the perfect companion for a wide range of applications, from studio recording to DJ sets and more.

Experience studio-quality sound with the reliability you deserve. These professional headphones are designed to meet the demands of any audio enthusiast and are ready to handle the challenges of a wide range of applications.

• Type: Wired, Closed Design
• Driver diameter: ø50 mm
• Impedance: 32 ohms
• Sensitivity: 102 ± 3 dB
• Frequency response: 10 Hz-30 kHz
• Nominal power: 350 mW
• Max. power: 1000 mW
• Noise reduction: = 20 dB
• Cable length: 3 m
• Plug: ø 3.5 mm + ø 6.35 mm
• Weight: 265 g

The Banana is Tonar's legendary yellow DJ cartridge, designed to meet the demanding demands of DJs. Its integrated design, which connects directly to the SME-type tonearm connector, makes it incredibly easy for DJs to install their cartridge while on tour.

The Gatt HP-10 headphones are made of lightweight materials, have soft ear cushions, and a very comfortable padded headband. The headphones are foldable, so they take up minimal space, making them easy to carry. The Gatt HP-10 has a fixed 150 cm cable and comes with a gold-plated 3.5 mm to 6.3 mm adapter.

• type: wired, closed design
• transducer type: dynamic
• driver diameter: Ø40mm
• sensitivity: 100dB +-3dB at 1kHz
• impedance: 32
• frequency response: 20Hz-2kHz
• nominal power: 30mW
• max. input power: 100mW
• cable: Ø2.2mmx1.5m
• adapter: stereo 3.5mm+6.3mm gold plated
• net weight: 190g

High-power DJ headphones
Very high output power: 3500mW max.
57mm speakers provide exceptional bass reproduction
Easily foldable, perfect for mobile use
3m coiled cord

While playing your records, and even while storing them, air pollution from outside (car exhaust, dust) and even from inside the house, such as cigarette smoking and cooking fumes, causes a tough film to form on your records. This film is difficult to clean and cannot be removed with just a record brush. During playback, the stylus scrapes away some of the residue that accumulates around the stylus tip, causing distortion during playback or even popping out of the groove. To prevent this, you should thoroughly clean your records at least once a year. This can be done with a record cleaning machine.

There are many models on the market, but the most affordable yet highly efficient model is the Knosti Disco Antistat. By washing your records with this machine, you can not only remove the aforementioned contamination, but also the residue of the former Lenco Clean fluid used in the past for wet playback. This fluid left a crystallized residue in the groove that was almost impossible to remove, so the records could only be played wet afterward. But now the Tonar Disco Antistat also does an excellent job of removing these crystals. At the same time, the TonarKnosti Fluid reduces the buildup of static electricity on the records.

Suitable for all vinyl record sizes, 7 inches, 10 inches, and 12 inches in diameter. Caution! Never use TonarKnosti Fluid or Tonar QS fluid to clean 78 RPM shellac records. The alcohol used in our fluids can permanently damage or destroy shellac.

The Pro8 v4 is the most powerful model in the Prodipe monitor range, designed for those who demand both depth and precision. With 100 + 40 Watts RMS bi-amplification, an 8" fiberglass woofer, and a front-facing bass reflex port, it delivers extended, natural bass and excellent listening comfort, without the unwanted rumble often found in larger monitors.

A new neodymium dome tweeter, redesigned electronics, and advanced active filtering provide greater speed, dynamics, and a perfectly smooth frequency response. The cabinet is made of high-density wood, eliminating unwanted vibrations and ensuring consistent sound quality and strikingly natural reproduction across all registers.

Connectivity is extensive – XLR, 6.35 mm TRS, and RCA – while the independent treble attenuator allows for precise adjustment to any listening environment. Compact, elegant, and refined, the Pro8 v4 offers studio-quality neutrality, harmonic balance, and power, especially when paired with the Pro 10S v4 subwoofer for a complete monitoring setup.

The Pro7 v4 continues Prodipe's tradition of precision studio monitors, offering the perfect balance between compact 5" models and the power of an 8" monitor. With 70 + 35 watts RMS bi-amplification, a 6.5" fiberglass woofer, and a front-firing bass reflex port, it delivers consistent, natural bass without booming, combined with pinpoint highs for truly close-up listening.

Equipped with a new neodymium dome tweeter and redesigned electronics, the Pro7 v4 achieves greater speed, dynamics, and clarity, easily adapting to today's wide range of musical styles. The high-density wood cabinet ensures stability and eliminates unwanted vibrations, while the redesigned active filtering guarantees smooth frequency separation and consistent sound quality.

Featuring universal connectivity (XLR, TRS 6.35mm, RCA) and an independent treble attenuator for personalized adjustment, these monitors combine professional accuracy with practical versatility. Compact, sleek, and built for modern studios, the Pro7 v4 delivers exceptional neutrality, harmonic balance, and value.

Vogel's XCW 100 is a convenient way to hide all your cables.

The Gatt Audio DM-40 is a very affordable dynamic microphone that can withstand a few knocks. It's ideal for karaoke but can also be used on stage. Its cardioid pickup pattern picks up very little ambient noise.

The DM-40 is ideal for giving speeches, playing instruments, and its on/off switch makes it very practical for karaoke, among other things. Includes a cable.

Discover the ultimate combination of timeless style and professional performance with the DM-500 steel-bodied microphone, inspired by the most iconic microphone designs. Whether you're creating at home or on stage, this microphone offers unparalleled sound quality and durability.

With its rugged steel housing, this microphone is built to last, even in the most demanding environments. Whether you're singing, speaking, or recording, this microphone delivers consistent, clear performance every time.

Add a touch of elegance to your setup and let your voice shine with our steel-bodied microphone. A perfect choice for both amateurs and professionals who demand only the best.

The Gatt Audio DM-700 is a professional and robust dynamic microphone. Perfect for vocalists. The cardioid pickup pattern suppresses unwanted ambient noise and minimizes feedback. The low impedance ensures trouble-free operation with full signal bandwidth over long cable runs. Cable included.

• A compact multifunctional speaker system with internal media player + Bluetooth.
• The MOVIL-1 has a rechargeable Li-ion battery on board for mobile use.
• 2 additional mono inputs for microphones, instruments or other audio signals with individual level control.
• The mono inputs also have an individual echo effect control.
• It has a 35mm pole stand adapter but can also be put on the floor in many different positions.
• All this makes it the perfect tool for many applications:
  • Lightweight portable sound system for parties, singers or musicians
  • Easy-to-transport audio system for speeches and presentations
  • Mini PA system, even when no electricity is available
  • Personal audio monitor (keyboard, guitar, etc.)
  • Background music @ garden parties
  • Travel companion
  • …
• 50Wrms Class D amplifier with 6.5" woofer + 3 x 3" tweeters.
• Stereo mini jack input to connect an external player.
• Integrated USB player for MP3, WAV, WMA, APE and FLAC files.
• Bluetooth TWS function for wireless stereo when 2 speakers are used.

Dual wireless microphone receiver with handheld microphone, beltpack and headset.
LCD display for easy installation
Simple channel setting via IR transmission.
Both the remote control and Beltpack can be used with rechargeable batteries!
16 selectable frequencies via PLL synthesizer:
Receiver 1 (left): channels 1 to 8
Receiver 2 (right): channels 9 to 16
2 separate balanced XLR outputs
1 x 6.3 mm jack output with mixed signal from both channels
Frequency range: 823-832MHz (free use in most European countries)
Including plastic case

Dual wireless microphone receiver with beltpack and headset.
LCD display for easy installation
Simple channel setting via IR transmission.
Beltpack can be used with rechargeable batteries!
16 selectable frequencies via PLL synthesizer:
Receiver 1 (left): channels 1 to 8
Receiver 2 (right): channels 9 to 16
2 separate balanced XLR outputs
1 x 6.3 mm jack output with mixed signal from both channels
Frequency range: 823-832MHz (free use in most European countries)
Including plastic case

A powerful 12" PA speaker combination with integrated MP3 player (also plays WMA files) + FM radio + Bluetooth®

• The MP3 player accepts both USB sticks and SD-HC memory cards up to 64GB
• Via Bluetooth® you can also:
  • Stream audio from your smartphone to the PPA-122
  • Adjust various settings of the internal player, using a FREE APP (available for Android and iOS )
• The FM radio has an integrated antenna (no broken antennas) and automatic programming for preset stations
• Powerful 250 Wrms amplifier (500 W music)
• In addition to the integrated player, the device is equipped with the following connections:
  • 2 MICROPHONE INPUT (balanced and unbalanced)
  • 1 LINE INPUT (balanced and unbalanced)
  • 1 Stereo Mini-Jack (only available when the internal player is not used)
• LINE OUTPUT (balanced) for connecting additional speakers
• Treble/Bass Control
• Heavy-duty polypropylene cabinet housing
• Built-in heavy-duty carrying handle
• Built-in 35mm support adapter
• Built-in Lifting Points
• Powerful 30cm (12”) bass speaker
• Powerful 3.5cm (1.35”) Compression Driver

Diversity system wireless microphone with handheld microphone

GOMono-F8 receiver

• 16 UHF frequencies
• Frequency range: UHF 823~832 and 863 ~ 865 MHz (4G compatible)
• The Diversity system ensures perfect reception
• Adjustable squelch to absorb interference
• You can use up to 4 receivers simultaneously (4 mic)
• Adjustable antennas (front)
• Average range in perfect conditions: 70m
• Balanced XLR outputs and unbalanced jack output
• Use FREE-RACK to stack them in racks (optional)
• Dimensions: 130 x 36 x 92 mm

GOHand-F8 transmitter

• Handheld microphone only
• Must be combined with a GO-MONO receiver
• High-quality unidirectional electret
• Distortion percentage: less than 1% at 1 kHz
• Operates on 2 AA batteries of type 1.5 V
• Dimensions: 237 x 58 mm

• Frequency response: 20Hz - 20KHz
• THD @ +10dBu: < 0.008%
• Residual noise
  • MAIN output: -103dB
• Input gain
  • Microphone : de 0dB à +45dB
  • Line: -20dB to +25dB
• Phantom: +48V DC
• EQ
  • HIGH: +/- 15dB @ 12KHz
  • LOW: +/- 15dB @ 80Hz
• Max output level
  • MAIN: +21 dBu
  • Headphone output: +18 dBu
• Input impedance
  • Microphone: 2.3K Ohms balanced
  • Line: 20 K Ohms balanced
  • RCA: 24 K Ohms unbalanced
• Output impedance
  • MAIN: 120 Ohms
  • REC OUT: 1 K Ohms
  • PHONES: 25 Ohms
• Vu meter: -20 dB, -10 dB, 0dB, clip
• Power supply : AC100~240V 50/60 Hz > DC12V 1A switch power adapter
• Power consumption: 11W
• Size (H x L x E): 165 x 120 x 68 mm
• Weight: 0.68 kg

• Professional 2-channel power amplifier
• Extremely compact 19” housing, height only 1U (44mm)
• Lightweight design based on soft start switch mode power supply
• 3 amplifier modes: stereo, mono and bridge
• Power stereo:
  • 2x 400Wrms @ 4Ω
  • 2x 250Wrms @ 8Ω
• Power bridge:
  • 1x 800Wrms @ 8Ω
• Very efficient cooling, using temperature controlled fans.
• Peak limiter prevents signal distortion
• Switchable 75Hz / -24dB low cut filter
• Adjustable sensitivity input: 0.775V ~ 1.0V ~ 1.44V
• Ground lift switch
• DC fault + high temperature + overload and short circuit protections
• Balanced XLR inputs & jack outputs: daisy chaining of several amplifiers
• 3 Speakon® outputs: left + right channels + bridge

• Superior, crystal clear, sound quality from a compact full range speaker cabinet.
• The VIBE15 Mk2 can be easily upgraded to an active (powered) cabinet: just plug-in the optional AVM-2 amplifier module, a matter of minutes!
• Can also be used as a stage monitor.
• Perfect for permanent installation in bars, clubs and all kinds of venues where small cabinet size and sound quality at high SPL are important!
• Perfect for portable use: DJ, hiring companies, …
• VIBE15 Mk2 and VIBE15-SUB Mk2 or VIBE18-SUB Mk2 make a perfect couple for more demanding situations.
• Solid, high strength, MDF enclosure
• Scratch resistant polyurethane painting
• Strong Metal grill with acoustic foam on the inside: improved look and better protection the speaker components against dust and splashing water.
• Strong M8 Rigging Points
• Built-in 35mm Speaker stand adapter
• High Power 15inch (38cm) Woofer
• High Power 1.5inch Titanium Driver
• Specially designed Glass fiber horn
• 2 Neutrik Speakon® connectors
• Built-in heavy duty carrying handles
• Heavy-duty rubber feet

The AE120 is the flagship of the 100 series and is designed as a three-way loudspeaker. The AE120 delivers big sound from a relatively small speaker, with a stylish design. Two bass drivers deliver a truly room-filling performance. A separate midrange driver, housed in its own compartment within the speaker, neutralizes any reflections within the cabinet. Integrated with a Wide Dispersion Technology waveguide, the 25mm soft dome tweeter ensures high sensitivity, control, and distortion-free operation.

The three-way crossover compensates for impedance differences to prevent resonance issues that can slow down the bass and unnecessarily color the midrange. Special attention was paid to phase and time alignment for beautiful coherence across the entire frequency range. This results in very even distribution with exceptionally clear highs and mids and a very tight bass sound. The baffle is made of 18mm MDF and, like its smaller brother, the AE109, is weighted to dampen vibrations. The internal design is specifically designed to minimize midrange coloration for a clear and open sound. Furthermore, the speaker features a discreet plinth for added stability, which improves dynamics and stereo focus.

The AE109 effortlessly delivers room-filling music from one of the most compact floor-standing speakers, just like the acclaimed original AE109 from 20 years ago. This is achieved by using two 110mm paper cone drivers with an ultra-high-force motor system, combined with a soft 25mm dome tweeter. The 2.5-way crossover was designed specifically for this speaker and delivers sound quality and power never before seen in this size. Special attention was paid to phase and time alignment for beautiful coherence across the entire frequency range.

Like the AE100 bookshelf speaker, the cabinet is made of 18mm MDF, and its design is heavily inspired by the award-winning Reference series. The result is a beautifully clear sound with power and presentation that will naturally excite you.

• Very compact subwoofer cabinet with powerful bass reproduction: perfect for discrete installation in clubs and pubs, also very suitable for portable applications.
• The VIBE15-SUB Mk2 can be easily upgraded to an active (powered) cabinet: just plug-in the optional AVM-2 amplifier module, a matter of minutes!
• Perfect for permanent installation in clubs, discotheques and all kinds of venues where good sound quality at high SPL is important!
• Perfect for portable use: DJ, hiring companies, …
• VIBE15-SUB Mk2 can be combined with VIBE10 Mk2 or VIBE12 Mk2 to obtain a warm, full bodied sound!
• Solid, high strength, plywood enclosure
• Scratch resistant polyurethane painting
• Strong Metal grill with acoustic foam on the inside: improved look and better protection the speaker components against dust and splashing water.
• Built-in M20 stand adapter on the topside.
• High Power 15inch Woofer with ALU basket
• Built-in heavy duty carrying handles
• Fixing points on the back panel for optional wheels
• Heavy-duty rubber feet

The AE109 effortlessly delivers room-filling music from one of the most compact floor-standing speakers, just like the acclaimed original AE109 from 20 years ago. This is achieved by using two 110mm paper cone drivers with an ultra-high-force motor system, combined with a soft 25mm dome tweeter. The 2.5-way crossover was designed specifically for this speaker and delivers sound quality and power never before seen in this size. Special attention was paid to phase and time alignment for beautiful coherence across the entire frequency range.

Like the AE100 bookshelf speaker, the cabinet is made of 18mm MDF, and its design is heavily inspired by the award-winning Reference series. The result is a beautifully clear sound with power and presentation that will naturally excite you.

The AE100 is a compact speaker for bookshelves or speaker stands. This speaker is built precisely according to Acoustic Energy's philosophy.

The AE100 was designed to produce a loudspeaker that delivers a lot of sound for its size. This was achieved by building a 110mm mid-bass driver around a powerful long-throw motor system. The bass frequencies were enhanced by a large cross-section in the bass port, which eliminates turbulence.

A 25mm soft dome tweeter with Acoustic Energy's "Wide Dispersion Technology" completes the package. The whole thing is housed in an 18mm thick MDF cabinet. With design elements taken directly from the acclaimed Reference series and a classically inspired appearance, this speaker is sure to look great in any living room.

• Superior, crystal clear, sound quality from a compact full range speaker cabinet.
• The VIBE10 Mk2 can be easily upgraded to an active (powered) cabinet: just plug-in the optional AVM-1 amplifier module, a matter of minutes!
• Can also be used as a stage monitor.
• Perfect for permanent installation in bars, clubs and all kinds of venues where small cabinet size and sound quality at high SPL are important!
• Perfect for portable use: DJ, hiring companies, …
• VIBE10 Mk2 and VIBE15-SUB Mk2 or VIBE18-SUB Mk2 make a perfect couple for more demanding situations.
• Solid, high strength, MDF enclosure
• Scratch resistant polyurethane painting
• Strong Metal grill with acoustic foam on the inside: improved look and better protection the speaker components against dust and splashing water.
• Strong M8 Rigging Points
• Built-in 35mm Speaker stand adapter
• High Power 10inch (25cm) Woofer
• High Power 1.5inch Titanium Driver
• Specially designed Glass fiber horn
• 2 Neutrik Speakon® connectors
• Built-in heavy duty carrying handles
• Heavy-duty rubber feet

• Superior, crystal clear, sound quality from a compact full range speaker cabinet.
• The VIBE12 Mk2 can be easily upgraded to an active (powered) cabinet: just plug-in the optional AVM-1 amplifier module, a matter of minutes!
• Can also be used as a stage monitor.
• Perfect for permanent installation in bars, clubs and all kinds of venues where small cabinet size and sound quality at high SPL are important!
• Perfect for portable use: DJ, hiring companies, …
• VIBE12 Mk2 and VIBE15-SUB Mk2 or VIBE18-SUB Mk2 make a perfect couple for more demanding situations.
• Solid, high strength, MDF enclosure
• Scratch resistant polyurethane painting
• Strong Metal grill with acoustic foam on the inside: improved look and better protection the speaker components against dust and splashing water.
• Strong M8 Rigging Points
• Built-in 35mm Speaker stand adapter
• High Power 12inch (30cm) Woofer
• High Power 1.5inch Titanium Driver
• Specially designed Glass fiber horn
• 2 Neutrik Speakon® connectors
• Built-in heavy duty carrying handles
• Heavy-duty rubber feet

• Frequency response: 20Hz - 20KHz
• THD @ +10dBu: < 0.008%
• Residual noise
  • MAIN output: -103dB
  • AUX SEND output : -90dB (only for Mi4U and Mi6U)
• Input gain
  • Microphone : de 0dB à +45dB
  • Line: -20dB to +25dB
• Phantom: +48V DC
• EQ
  • HIGH: +/- 15dB @ 12KHz
  • LOW: +/- 15dB @ 80Hz
• Max output level
  • MAIN/AUX SEND: +21 dBu
  • Headphone output: +18 dBu
• Input impedance
  • Microphone: 2.3K Ohms balanced
  • Line: 20 K Ohms balanced
  • Aux / RCA: 24 K Ohms unbalanced
• Output impedance
  • Main/Aux Send: 120 Ohms
  • REC OUT: 1 K Ohms
  • PHONES: 25 Ohms
• Vu meter: -20 dB, -10 dB, 0dB, clip
• Power supply : AC100~240V 50/60 Hz > DC12V 1A switch power adapter
• Power consumption: 11W
• Size (H x L x E): 220 x 160 x 68 mm
• Weight: 0.78 kg

• Frequency response: 20Hz - 20KHz
• THD @ +10dBu: < 0.008%
• Residual noise
  • MAIN output: -103dB
  • AUX SEND output : -90dB (only for Mi4U and Mi6U)
• Input gain
  • Microphone : de 0dB à +45dB
  • Line: -20dB to +25dB
• Phantom: +48V DC
• EQ
  • HIGH: +/- 15dB @ 12KHz
  • LOW: +/- 15dB @ 80Hz
• Max output level
  • MAIN/AUX SEND: +21 dBu
  • Headphone output: +18 dBu
• Input impedance
  • Microphone: 2.3K Ohms balanced
  • Line: 20 K Ohms balanced
  • Aux / RCA: 24 K Ohms unbalanced
• Output impedance
  • Main/Aux Send: 120 Ohms
  • REC OUT: 1 K Ohms
  • PHONES: 25 Ohms
• Vu meter: -20 dB, -10 dB, 0dB, clip
• Power supply : AC100~240V 50/60 Hz > DC12V 1A switch power adapter
• Power consumption: 11W
• Size (H x L x E): 220 x 210 x 68 mm
• Weight: 0.98 kg